Home > Products > Neodymium Magnet Bar
Product Information

Neodymium Bar (Samarium-cobalt) Magnet

It is possible to handle custom-made products other than the standard products.

Examples of custom-made double-tubed grid designs

MNMB-U with Grid Magnet Housing

● It absorbs and removes powder from the raw material and
fine iron particles mixed in chemical powders, etc. by the
strong magnetic force by attachment to an air feed line or
a pipe duct etc., according to the pipe's diameter and
processing capacity.
● Foreign particles attached to the magnet are removed by
releasing the magnet through the access opening at the
front of the housing.
● It is possible to produce a double tube design that can also
be cleaned easily. (A planning meeting is required).

Sanitary Magnet Cross Tube MNMB-S


※It is possible to produce sizes not listed in the size table.
● It is installed in the feed pipe between processes, and
absorbs and removes fine metallic particles from high
viscosity foods such as juice, ham, sausage, jam, minced
meat, seasoning, dairy products, and miso etc. by the
strong magnetic force.
● The unit has a sanitary specification that is suitable for foods
and medicines.
It is also possible to produce a double tube design.

The sanitary finish achieved by our original special welding technique is suitable for the food and medical industries.

Sanitary Magnet Cross Tube MNMB-OS


※It is possible to produce sizes not listed in the size table.
● It is installed in the feed pipe between processes, and
absorbs and removes fine metallic particles from high
viscosity foods such as juice, ham, sausage, jam, minced
meat, seasoning, dairy products, and miso etc. by the
strong magnetic force.
● The specification has a sanitary specification that is suitable
for foods and medicines.
● The structure reduces formation of a liquid reservoir at the
bottom.
It is also possible to produce a double tube design.

Sanitary Magnet Straight Element MNMB-E


※It is possible to produce sizes not listed in the size table.
● It is suitable for mayonnaise and seasonings, etc., and
effective in a place only processing a small amount
(flow rate).
● The structure is simple, so it is easy to separate and clean.
● It is compact and only requires a small installation space.
● The unit has a sanitary specification that is suitable for foods
and medicines.

(Unit: mm)

Sanitary Magnet L-shaped Element MNMB-L


▲ The model in the picture is the double tube design.
※It is possible to produce sizes not listed in the size table.
● It is suitable for juice, fruit juice, dairy products, tea, soy
sauce, chili oil, minced meat, and seasonings, etc., and
effective in a place only processing a small amount
(flow rate).
● The structure is simple, so it is easy to dismantle and clean.
● It is compact and only requires a small installation space.
● The unit has a sanitary specification that is suitable for foods
and medicines.

(Unit: mm)

Square Grid for Resin/Pellets MNMB-PK

※It is possible to produce sizes not listed in the size table.
● It absorbs and removes fine iron particles etc. as the material
is falling down by aligning strong magnets as a grid layout
and installing in a square hopper.
● It is possible to design and produce units to fit existing
hoppers.
● It is possible to produce a two-stage design.

(Unit: mm)

Circle Grid for Resin/Pellets MNMB-PM

● It absorbs and removes fine iron particles etc. as the material
is falling down by aligning strong magnets as a grid layout
and installing in a circular hopper.
● It is possible to design and produce units to fit existing
hoppers.

Magnet Separator for a Resin Molding Machine MNMB-J


● It absorbs and removes iron particles mixed in resin pellets or
when crushing rubber etc. by the strong permanent
magnet.
● It is effective in a place only processing only for a small
amount.
● The structure is simple, so it is easy to dismantle and clean.
● It is compact and only requires a small installation space.

Intended use and model selection of magnet products separated by industry type

Inquiry

Please feel free to as us for price, lead time, materials, and application examples.
Inquiry by Telephone or Fax ⇒ Please inquire to the contact below.
Inquiry Online ⇒ Please use the Inquiry Form.
    • (Tel./Line ID : 062-597-8705)
  • CONTACT
    SIMOTEC (THAILAND) CO., LTD.

    Address
    304 Industrial Park, 206 Moo 7
    Thatoom Srimahaphote
    Prachinburi 25140 Thailand

    TEL
    037-218-808 / 037-480-268

    E-MAIL
    create@simotecthailand.co.th
    yamada@simotec.co.jp (GM)

    We are proud of our magnet, and whiteboard. Please feel free to contact us about our products.